READY FOR A QUOTE?

NX CAM Post Processors

NX Machine Post Processor development and optimization

Any CNC installation will have its own logic and movement quirks that require a carefully calibrated post-processor to operate properly. Creating a post from scratch is a resource-intensive proposition and errors can result in costly mistakes and perhaps damage to the machine itself.

Even pre-made posts will require some optimization on-site to ensure proper calibration. Our CAM experts are experienced with all aspects of post-processor development for 3-and 5-axis mills, as well as turn-mill centers, and can assist in getting your machine up and running quickly.

NX Simulation kits with full machine kinematics

An idle machine affects your bottom line. Machine downtime can be reduced significantly or avoided altogether by utilizing simulation kits. A sim kit will run concurrently during machine operation allowing for critical testing and simulation of new operations while avoiding costly interruptions - meaning your machine is always running.

In addition, sim kits are programmed for efficiency of operation allowing for maximum performance of the machine program during its operating lifetime. Our specialists have experience developing sim kits for a variety of applications and can assist you with a tailor-made solution.

Popular Machines from our Posts Library

POSTS 1

DMC 125 U duoBLOCK
DMG NTX 1000
DMG NTX 2000
DMG NVX5100
DMU 50 Siemens 840D
Doosan Puma 400
Feeler VB1100
Haas VF3
Haas VF5 with rotary

POSTS 2

Makino A51
Makino D500
Makino IQ300
Mazak 1060v/8 Mazatrol Matrix 2
Mazak i200
Mazak Intergrex i500v
Mazak Variaxis 730
Mighty Viper 1000AP
Mikron HPM600

POSTS 3

Mori NL1500
Mori NMV5000
Nakamura WT100
Okuma LB35II & LB45II
Okuma LT 3000
Okuma Macturn 50
Okuma MB4000H
Okuma Millac 1000VH
Okuma MU10000H
Yama Seiki GS-4300 L2

Make your next step, the best step...

Reach out to us about your project. We're engineers and we love to get into the details!

Reach out to us about your project. We're engineers and we love to get the details!

For fabrication requests, we will need the following details to provide cost estimates for you:

  • 3D CAD model available?
  • Drawing or PMI on model to convey desired feature tolerances available?
  • Desired material, special finishes/coatings, etc?
  • Quantity needed and desired delivery date?

Joomla Forms makes it right. Balbooa.com

Sherpa Design:
guiding others to success

Our Affiliated Partners

Our Address

6700 North New York Avenue
Suite 231
Portland, Oregon 97203
503-771-3570